flagstone Morris County NJ is a
generic flat stone, usually used for paving slabs or walkways, patios, fences
and roofing. It may be used for memorials, headstones, facades and other
constructions. flagstone Morris County NJ is a sedimentary rock that is split into layers along
bedding planes. Flagstone is usually a form of a sand stone composed of
feldspar and quartz and is erinaceous in grain size (0.16 mm – 2 mm in
diameter). The material that binds flagstone is usually composed of silica,
calcite, or iron oxide. The rock color usually comes from these cementing
materials. Typical flagstone colors are red, blue, and buff, though exotic
colors exist. Around the thirteenth century, the ceilings, walls and floors in
European architecture became more ornate. Anglo-Saxons in particular used
flagstones as flooring materials in the interior rooms of castles and other
structures. Flagstone is a generic term that describes flat stone used for both
landscaping and building/construction purposes.
This type of
sedimentary rock is cut into thin layers, either into irregular shapes or
rectangular pieces (referred to as dimensional flagstone). Depending on the
quarry and the source of the material, flagstone can be found in an array of
different color families. Typical shades include brown, tan, gray, blue, green
and reddish/browns. The stones are known for being extremely durable and
weather-resistant, allowing for minimal maintenance and long-lasting beauty and
functionality. In addition to this, you’ll find that the texture of flagstone
makes it naturally slip-resistant. Numerous different types of flagstone are
available to suit your every need and desire. As a result, the materials are
perfect for swimming pool decks, as well as paths and other surfaces that may
be traversed during periods of inclement weather.
Flagstone patios have
an irregular pattern, visually, because not all of the individual pieces are
the same shape. Sometimes, and especially if you are pursuing a formal
landscape design style, you will want a patio that is composed of pieces that
do all bear the same shape. Flagstone laid in the sand will have to be
re-adjusted over the year; as settling occurs, you will have to add sand, to
keep the desired level. If you do not mind tinkering with a project after it is
done, this should not present a problem. While the dry-construction technique
for flagstone patios has both pros and cons. On the plus side, the building is
easy, as is the repair. On the minus side, it is almost certain that it will
need to be repaired. There's been a long time to test its suitability.
Light weight, pale
color and resistance to heat absorption have made it a popular choice where
pool decking can become impossibly hot in the summer. However, the porosity of
this material makes it problematic too, and in many conditions homeowners are
redoing their patios with harder flagstone alternatives such as metamorphic
quartzite for these reasons, moisture absorbed into sandstone can expand to
cause flaking, significant problems occur adjacent to irrigated areas due to
overspray, hard freezing may cause displacement of individual flags, chlorinated
swimming pool water can create significant damage, wear and tear causes gradual
erosion of the surface that leads to low spots and years of spills and grilling
spatter can irreparably discolor sandstone.
